Medical Devices Innovation for Africa

Sudesh Sivarasu; Harry  Teifel; Riaan  Stopforth; Qhamani  Maqungu; Lan  Xu; Neil  Stacey; David  Rubin; Diane  Hildebrandt; Ntokozo  Magubane; Malebogo  Ngoepe; Kashangabuye Jordan  Masirika; Lara  Timm; Maureen  Etuket; Kandolo Jire  Christian; Georgina  Mampuru; Jonathan  Oehley; Vernon  Louw; Lynthia  Paul; Izak  Minnie; Stewart  Gibson; Joel  Philpott; Richard  Raine; Alexander  Francis; Doron  Joffe; Muhammad Arshad  Eyasim; Jasveer  Pillay; Aliya  Singh; Kerina  Virasamy; Pragesh  Govender; Uchenna Ogemdi  Okwuosa; Oscar  Philander; Brandon  Reabow; Elisha Didam  Markus; Clive  Hands; Sebolelo  Mokhobo-Nomvete

doi:10.15641/UCTLib40

Medical Devices Innovation for Africa: enabling industrialisation

Synopsis

Medical device engineering and innovation are en route to being the most sophisticated and celebrated discipline in future!

This book is the proceedings from the MediVentors Consortium funded by the Manufacturing, Engineering and Related Services SETA (MerSETA) and hosted by the University of Cape Town's Division of Biomedical Engineering within the Department of Human Biology, Faculty of Health Sciences.

Over 30 students from 4 universities (UCT, CPUT, UKZN and WITS) participated and were trained in this Integrated Skills Development Programme (ISDP) around medical device industrialisation. This book compilation summarises key outcomes from select innovations from our future medical device manufacturing industry leaders.

Come, let us start a new industrial revolution in the Medical Device Industry.

Abstract views: 2099 [Downloads in brackets]

Chapters

Table of Contents

PDF [52] HTML [18]
Foreword

Sebolelo Mokhobo-Nomvete

PDF [35] HTML [9]
Chapter 1: Overview of the mediventors challenge

Sudesh Sivarasu, Harry Teifel

DOI: https://doi.org/10.15641/uctlib40374

PDF [134] HTML [40]
Chapter 2: Establishing eco-systems in support of medical devices industrialisation

Harry Teifel

DOI: https://doi.org/10.15641/uctlib40375

PDF [97] HTML [19]
Chapter 3: Medical monitoring wearable technology

Riaan Stopforth

DOI: https://doi.org/10.15641/uctlib40376

PDF [117] HTML [36]
Chapter 4: Design and development of a tracking system for autoinjectors using Bluetooth low energy with autonomous emergency alert

Qhamani Maqungu, Sudesh Sivarasu

DOI: https://doi.org/10.15641/uctlib40377

PDF [86] HTML [24]
Chapter 5: Low-cost load shedding-resilient medicine storage with phase-change material
theoretical heat Transfer evaluation of a design concept

Lan Xu, Neil Stacey, David Rubin, Diane Hildebrandt

DOI: https://doi.org/10.15641/uctlib40378

PDF [183] HTML [92]
Chapter 6: Development and validation of a medical device software to size autoinjector components

Ntokozo Magubane, Sudesh Sivarasu, Malebogo Ngoepe

DOI: https://doi.org/10.15641/uctlib40379

PDF [148] HTML [34]
Chapter 7: Development of an integrated covid-19 tracking and monitoring system

Kashangabuye Jordan Masirika

DOI: https://doi.org/10.15641/uctlib40380

PDF [119] HTML [19]
Chapter 8: Design and development of an open-source ADL compliant prosthetic arm for trans-radial amputees

Lara Timm, Maureen Etuket, Sudesh Sivarasu

DOI: https://doi.org/10.15641/uctlib40382

PDF [118] HTML [33]
Chapter 9: Development of a control algorithm for a bag valve mask ventilator

Kandolo Jire Christian, Georgina Mampuru

DOI: https://doi.org/10.15641/uctlib40383

PDF [132] HTML [22]
Chapter 10: Development of an ultraviolet c irradiation device
initial findings for the treatment of spiked whole blood

Jonathan Oehley, Sudesh Sivarasu, Vernon Louw, Lynthia Paul

DOI: https://doi.org/10.15641/uctlib40384

PDF [117] HTML [29]
Chapter 11: The use of hollow fibre membrane dialysers in a liquid-liquid configuration for respiratory support

Izak Minnie, Stewart Gibson, Neil Stacey

DOI: https://doi.org/10.15641/uctlib40385

PDF [173] HTML [77]
Chapter 12: Design and development of a bipap non-invasive ventilator
prototype development

Joel Philpott, Sudesh Sivarasu, Richard Raine

DOI: https://doi.org/10.15641/uctlib40386

PDF [187] HTML [425]
Chapter 13: Feasibility of repurposing hollow fibre membrane dialysers for oxygenating blood in resource constrained environments

Alexander Francis, Doron Joffe, Lan Xu, Neil Stacey, David Rubin

DOI: https://doi.org/10.15641/uctlib40387

PDF [150] HTML [22]
Chapter 14: Design and development of a cost-effective cpap device with oxygenation and an automated mdi delivery system

Muhammad Arshad Eyasim, Sudesh Sivarasu

DOI: https://doi.org/10.15641/uctlib40388

PDF [89] HTML [22]
Chapter 15: Hospital oxygen tank valve defrosting system

Jasveer Pillay, Aliya Singh, Kerina Virasamy, Pragesh Govender, Riaan Stopforth

DOI: https://doi.org/10.15641/uctlib40389

PDF [227] HTML [29]
Chapter 16: Development of a peep (catpul) valve for ventilators
a computational approach

Uchenna Ogemdi Okwuosa, Oscar Philander

DOI: https://doi.org/10.15641/uctlib40390

PDF [150] HTML [74]
Chapter 17: Affordable orthotic moon boot alternative

Aliya Singh, Riaan Stopforth

DOI: https://doi.org/10.15641/uctlib40391

PDF [235] HTML [332]
Chapter 18: The design and devlopment of a low-cost high flow nasal oxygen device
a functional analysis

Brandon Reabow, Sudesh Sivarasu

DOI: https://doi.org/10.15641/uctlib40392

PDF [99] HTML [39]
Chapter 19: Systems integration of a smart iot-based telemonitoring system

Pragesh Govender, Riaan Stopforth, Sudesh Sivarasu, Elisha Didam Markus, Clive Hands

DOI: https://doi.org/10.15641/uctlib40393

PDF [109] HTML [43]
Full Monograph

PDF [525]